Eight design points and precautions for cabinet customization

Overall cabinet customization has long become a very mainstream method in renovating kitchens. It effectively combines a variety of equipment to meet everyone's daily cooking and storage needs. But cabinet customization is not simple, why not take a look at the eight design points and precautions of cabinet customization before ordering. Design points for cabinet customization: 1. It is best not to get the range hood and kitchen utensils close to the wall to prevent the edge of the pot from colliding with the wall. 2. The side of the cabinet close to the outer wall should consider the protrusion of the door line to prevent it from being affected when the door is opened. 3. The stainless steel sink and the stove should be pre-buried with sufficient indoor space for use, and the distance does not need to be very far, otherwise running back and forth during the cooking process will reduce the efficiency of cooking. 4. Pay attention to the composition in the corner of the kitchen countertop, and there must be an effective total area range to prevent the interference of the bearing capacity from causing rupture. 5. The embedded part of the socket should avoid the stainless steel sink. The total number of sockets should be designed according to the total number of electrical appliances. In addition, 2-3 sockets should be used to prevent damage to other sockets or use when purchasing other electrical appliances. 6. Accurately measure the length, width and height of the house (for example, the height from the wooden floor to the roof, the total width from the wall to the wall), and check whether there is any abnormality. 7. The water supply pipe is not suitable for less than 400mm, and the water supply pipe is not suitable for more than 100mm, or not less than 200mm. 8. The overall planning must be a large number of lighting areas. Fixtures are attached to the underside of the suspended closet to light up the control panel area.

Precautions for cabinet customization: 1. It is not recommended to design circular or irregular wooden cabinets, which are not only expensive, but also difficult to grasp the specifications. 2. The net size of the chamfered cabinet or the shallow cabinet baffle should not be less than 60mm, so as not to affect the installation of the door hinge base. 3. For European-style range hoods, do not design kitchen cabinets or iron shelves. For the range hoods in my country, it is more suitable to design the flap type. The height of the door frame should be increased by more than 50mm, and the bottom plate should be changed to the front, rear, left and right bars. 4. Remember to take into account all the protruding parts, such as water pipes, natural gas and smart water meters, and their switching power sockets. 5. It is very easy to open the door according to the careful consideration of the parts where the kitchen cabinets and refrigerators are placed. 6. Do not put gas stoves or household ovens under the window, otherwise the wind is likely to extinguish the fire or blow the curtains on the stove. 7. The countertops next to household ovens and gas stoves should be empty for hot frying pans and dishes. 8. Don't put the refrigerator next to the kitchen utensils, otherwise the refrigerator will consume a lot of energy to keep the low temperature due to the high temperature.