Four points to pay attention to when customizing the overall wardrobe

Four points to pay attention to in the customization of the overall wardrobe: 1. Plate and thickness: At this stage, the common plates for the customization of the overall wardrobe are: wood board, plywood, fiberboard, solid wood finger-jointed plywood, solid wood particle board, etc. In the case of purchasing a board, you must look at the environmental protection certification. There should be the name of the manufacturer and the stamp of the inspection company on it, and then check whether the release of indoor formaldehyde is less than 0.05mg/L. The quality of the board is good, and environmental protection is also good. reliable. In addition to considering the board, also pay attention to the thickness of the wardrobe. The key is to look at the thickness of the backboard of the wardrobe and the thickness of the cabinet board. Among them, there are several key thicknesses of the backboard of the wardrobe: 5mm, 9mm, 18mm, etc. 5mm is the common thickness of the store, it can improve the depth of the wardrobe, and the cost is relatively low. However, the thickness of the 5mm back plate is easy to get wet and easy to break. 9mm is another common thickness specification of the back panel. The waterproof performance is much better than that of 5mm, and the bearing capacity is relatively strong. It can support the gravity of the hanging cabinet and each multi-layer board, ensuring the firmness of the wardrobe. The 18mm backplane is better than 9mm and 5mm in terms of waterproof and stability, but the depth of the wardrobe will also increase, and the cost is relatively high. Generally, it is not easy to use 18mm as the backplane, and the 18mm backplane is generally used for The back of the writing desk, the back of the two-sided cabinet.

2. Pricing method: At this stage, there are two pricing methods on the sales market: one is the projected area, and the other is the expanded area. The expansion area is based on the length multiplied by the width of the wardrobe, and the obtained range is multiplied by the price of the manufacturer. Assuming that the length of a wardrobe is 3 meters, the relative height is 2.5 meters, and the price is 600 yuan/square meter, then the total cost of the wardrobe is The project cost is 3×2.5×600=4500 yuan. This type of optimization algorithm is more commonly used, and there are more inside stories. In short, the projected area is calculated according to the total area of the board of the wardrobe. The total area and price of each board are calculated, and they add up to the area and price of the wardrobe. Although this method is more inconvenient, it is for customers. It is more reassuring. The manufacturer will pay as much as the material is used. Don’t worry about being cheated. Question: Which model and specification sheet must be used in each area of the wardrobe, which specifications and styles; whether to include auxiliary materials, such as: hardware, structural glue, etc., whether to include drawer cabinets; determine the delivery and installation operations, if delayed How to compensate during the construction period and other issues; the contract must be accompanied by design drawings and detailed data information. 4. Design specifications: The overall wardrobe customization is tailor-made. The settlement requirements should be considered in the design, and every key point should be paid attention to in the process of accurate measurement. Even a slight difference in size is likely to cause the wardrobe. Do not cater to the general brand is to have professional interior designers to measure accurately. Summary: First of all, choose a reliable brand, do a good job in the design, pay attention to the contract to avoid the minefield, and pay attention to the installer during the installation process. The pits in the customization of the overall wardrobe can basically be prevented.